Version 2.0
·
Last edited on 2025-10-31
Mechanical differences in the new BTL generation
Contents
Attachments
No attachments
1. Differences in the profile designs
Attention:
- Changed configuration
- Changed geometry of the housing
- Changed zero and end points
- Retaining clips must be replaced
2. Differences in the flat profile
Attention:
- Changed configuration
- Changed geometry of the housing
- Changed zero and end points
3. Differences in the round profile
Attention:
- Changed configuration
- Changed geometry of the housing
- Changed zero and end points
5. Differences in the bar designs
Attention:
- Not repairable due to design
- Note the width across flats
