Similar Illustration
Only CAD model download is supported
Not available in Webshop
Only CAD model download is supported
Inductive sensors for hazardous areas
Dimension
Ø 12 x 78 mm
Style Housing
M12x1
Installation
for flush mounting
Range
1.5 mm
Switching output
PNP normally open (NO)
Do you have any questions about the product?
Get in touch with us.
See tootelehekülg sisaldab teavet Eesti kohta
Inductive sensors for hazardous areas – BHS005P
The BHS B135V-PSD15-NEX-S04 inductive sensor, order code BHS005P, has an M12x1 housing with a diameter of 12 mm and a length of 78 mm. It is designed for flush mounting and provides a 1.5 mm sensing range. The switching output is PNP normally open (NO), with a switching frequency of 400 Hz. The housing is made of stainless steel and the sensing surface of ceramic.
The sensor operates with 10...30 VDC and is designed for an ambient temperature range of -25...100 °C. Its maximum pressure rating is 500 bar. Connection is provided by a 4-pin M12x1 male connector. The sensor has ATEX category 3G (EPL Gc), IP68 protection and CE, ATEX, IECEx and WEEE approval or conformity.
Only CAD model download is supported