Cylindrical throughbeam photoelectric sensors with M12 thread and different types of light
Through-beam sensors – BOS01WU
The BOS 12M-PO-RE10-S4 photoelectric sensor, order code BOS01WU, belongs to the 12M series and has a Ø 12 x 60 mm design. It operates as a through-beam sensor receiver with red LED light and a range of 0...8 m. The interface is PNP, normally closed (NC).
The sensor has a 4-pin M12x1 male connector and operates with an operating voltage Ub of 10...30 VDC. Its housing is made of nickel-plated brass, while the sensing surface consists of PMMA. The BOS 12M-PO-RE10-S4 carries CE, UKCA and cULus approvals/conformity markings, and is subject to WEEE.
Alternative products
|
|
Alternative
|
Further alternative
|
|
|
|
|
|
|
| BOS 12M-PO-RE10-S4 | BOS 12M-PS-RE10-S4 | BOS 12M-PA-RE10-S4 | |
|
60,77 EUR
List price
|
60,77 EUR
List price
|
65,92 EUR
List price
|
|
| Series | 12M | 12M | 12M |
|---|---|---|---|
| Dimension | Ø 12 x 60 mm | Ø 12 x 60 mm | Ø 12 x 60 mm |
| Interface | PNP: normally closed (NC) | PNP: normally open (NO) |
PNP: normally open (NO) PNP: normally closed (NC) |
| Principle of operation | Photoelectric sensor | Photoelectric sensor | Photoelectric sensor |
| Principle of optical operation | Through-beam sensor (receiver) | Through-beam sensor (receiver) | Through-beam sensor (receiver) |
| Light type | LED, red light | LED, red light | LED, red light |
| Range | 0...8 m | 0...8 m | 0...8 m |
| Connection | Connector, M12x1-Male, 4-pin | Connector, M12x1-Male, 4-pin | Connector, M12x1-Male, 4-pin |
| Housing material | Brass, nickel-plated | Brass, nickel-plated | Brass, nickel-plated |
| Material sensing surface | PMMA | PMMA | PMMA |
| Operating voltage Ub | 10...30 VDC | 10...30 VDC | 10...30 VDC |
| Approval/Conformity |
CE UKCA cULus WEEE |
CE UKCA cULus WEEE |
CE UKCA cULus WEEE |