Training
Make use of well-founded manufacturer knowledge. And benefit from application security.
You will get practical knowledge from the manufacturer in our workshops, in order to be able to work out the specifications of your applications optimally. You will concretely learn how to apply sensors and systems in the best possible manner in small groups – be it the basics of sensor technology and the selection of the correct active principle, fields of application and maintenance of the vision sensor, or options offering an IO link. Simply bring your task along. We'll resolve it together. In the workshop or even on site, with you.
Besides practical know-how, you will also acquire well-founded basic theoretical knowledge in our training: from constructive planning to simple configuration right up to tried and tested tips and tricks. You thus obtain the best conditions for high application security and increased productivity. Therefore, use knowledge from the manufacturer for greater efficiency.
The advantages
- high proportion of practical content: direct application and deeper understanding of the material learned
- high efficiency: learning in small groups by limiting the number of participants
- closer reference to users: assessing and resolving concrete tasks
Our workshops at a glance:
Below, you will find an overview of all available one-day courses along with the dates on which any course can be offered.
Topics:
IO Link integration
Condition Monitoring CMTK
Apprentice Training
BVS commissioning
Sensor Basics
IIoT & Edge Communication Basics
Dates:
May 2026: 12th, 13th, 14th, 19th, 20th, 21st
June 2026: 9th, 10th, 11th, 23rd, 24th, 25th
September 2026: 15th, 16th, 17th
October 2026: 6th, 7th, 8th, 20th, 21st, 22nd
November 2026: 10th, 11th, 12th, 24th, 25th, 26th
Here are the descriptions of the courses:
IO‑Link Integration | Learn IO‑Link from the ground up - covering the basics, PLC setup, and full system commissioning. Work hands‑on with a wide range of the latest Balluff IO‑Link devices using our dedicated test rigs. |
Condition Monitoring (CMTK) | Explore the full capabilities of the Condition Monitoring Toolkit. This course covers device features, Grafana dashboard creation, and the built‑in Node‑RED and Docker integrations that make CMTK a powerful edge solution. |
Apprentice Training | A practical introduction to core sensor technologies - inductive, capacitive, and magnetostrictive. Apprentices gain hands‑on experience and understand the real‑world applications behind each sensor type. |
Machine Vision (BVS) | Learn how to setup and commission a BVS machine vision system for different applications - from barcode reading to part alignment and mismatch detection - all configured through the BVS onboard web interface. |
Sensor Basics | An overview of modern sensor technologies used in industrial automation. This course helps experienced engineers get up to date with the latest developments and best practices in sensor applications. |
IIoT & Edge Communication Basics | Understand the fundamentals of MQTT, OPC UA, and REST APIs. We also demonstrate how to extract and transfer data from CMTK and IO‑Link masters to third‑party data storage systems. |
To book or request any further information about any of the training courses please contact [email protected] or alternatively call the office on +44 1606 812 777.