BNI00HL Parameter Read or Write Via Siemens IOL Device FB
1. BNI00HL Parameter Read or Write Via Siemens IOL Device FB
In this tutorial, we will walk through the process of configuring an IO-Link smart light device, specifically the Balluff BNI0085, within our TIA program.
First, we need to ensure that our program is compatible with the specific device model and its byte size definitions. We then import the necessary library and access the configuration options for IO-link devices. From there, we specify the controller settings, family, base blocks, and finally, the IO-link device itself.
Next, we map the data associated with this IO-link device using predefined tags to ensure accurate interpretation by the program. We also configure the device settings and define how the data is mapped and read/written to the device.
We then find the hardware ID number for our port and create a new data block with an array of bytes set to the correct value. With this configuration in place, we save and compile our program and download it to the device.
Finally, we use a watch table to verify that the brightness setting has been successfully applied and make any necessary adjustments to reduce the overall brightness. We review the updated values and confirm that they match our desired outcome. By following these steps, you can ensure seamless integration of your IO-Link smart light device with your TIA program.
Disclaimer
The technical information provided here free of charge in response to your inquiry is based on the knowledge available to BALLUFF and is intended to support you as effectively as possible in your technical question or application and to outline potential solutions.
As this technical information is provided free of charge, BALLUFF excludes liability for material defects and defects of title, unless there is intent or gross negligence on the part of BALLUFF or fraudulent intent. In this respect, BALLUFF shall only be liable for damages arising from defects in the technical information or from the breach of other contractual or non-contractual obligations in cases of intent or gross negligence. The above limitation of liability does not apply in cases of fraudulent intent, injury to life, body, or health, the assumption of a guarantee, or liability under the Product Liability Act. Any further liability of BALLUFF is excluded.
Before use in systems and machines, please check whether the information provided here free of charge is suitable for your application. By using the information provided here free of charge, you acknowledge these liability provisions.