How to Create a Custom GSDML with BET and Import into TIA Portal
1. Video Guide
In this tutorial, we'll show you how to:
- Import IODD Files into the Balluff Engineering Tool
- Create a custom GSDML file in the Balluff Engineering Tool using both Balluff and non-Balluff IO-Link Devices
- How to Create new default settings for the IO-Link Devices
- How to Import the custom GSDML file and use the custom devices list
Disclaimer
The technical information provided here free of charge in response to your inquiry is based on the knowledge available to BALLUFF and is intended to support you as effectively as possible in your technical question or application and to outline potential solutions.
As this technical information is provided free of charge, BALLUFF excludes liability for material defects and defects of title, unless there is intent or gross negligence on the part of BALLUFF or fraudulent intent. In this respect, BALLUFF shall only be liable for damages arising from defects in the technical information or from the breach of other contractual or non-contractual obligations in cases of intent or gross negligence. The above limitation of liability does not apply in cases of fraudulent intent, injury to life, body, or health, the assumption of a guarantee, or liability under the Product Liability Act. Any further liability of BALLUFF is excluded.
Before use in systems and machines, please check whether the information provided here free of charge is suitable for your application. By using the information provided here free of charge, you acknowledge these liability provisions.