Similar Illustration
Only CAD model download is supported
Only CAD model download is supported
Fork sensors Entry Line
Dimension
10 x 50 x 68 mm
Fork opening
30 mm
Interface
Push-pull: NO(PNP)/NC(NPN)
Principle of operation
Fork sensor
Principle of optical operation
Through-beam sensor
Do you have any questions about the product?
Get in touch with us.
This product page contains information for Lithuania – UAB INTERAUTOMATIKA, Vilnius
Fork sensors and angle sensors – BGL0070
The BGL 30A-100-S49 fork sensor, order code BGL0070, has dimensions of 10 × 50 × 68 mm and a fork opening of 30 mm. Its push-pull interface provides NO (PNP) and NC (NPN) switching. The through-beam optical principle uses divergent red LED light, with a light spot size of Ø 0.85 mm at the light exit.
The sensor has a connector with an M8×1 male, 3-pin configuration and an operating voltage of 10...30 VDC. Its housing consists of black-coated die-cast zinc, PUR and PA 6.6; the sensing surface is made of glass. The product carries CE, UKCA, WEEE and cULus approvals and conformities.
Only CAD model download is supported