Version 1.0
·
Last edited on 2024-11-26
MQTT Explorer for Monitoring an MQTT Network
Contents
Attachments
No attachments
1. Introduction
Using the MQTT Explorer Software for monitoring the MQTT Networking for analysis and find data address.
2. Create a MQTT Broker in NodeRED
Obs: If you have a Broker in your network ignore this Chapter.
First install the AEDESMQTT Broker pallet in Node RED - node-red-contrib-aedes -
Add AEDES Broker at NodeRED Flow and configure its.
Now, the Broker is working (IP address from broker is the IP Address from PC/System).
3. Connecting to Broker
Open the MQTT Explorer Software and Create a New Conection (Click in: +)
Configure this conection according to you Broker Settings. Click in Connect.
4. Monitoring Network
Now, we can see the all data avaliable from all MQTT nodes is this network:
In right top of this software it is possible see the topic address and data formating.