Reliably identify stamping tools in battery production
UHF RFID system for automatic tool validation and process reliability
For the precise punching process of anode and cathode, it is important that the tools used are reliably identified before use. With our BIS V UHF RFID system, you can ensure that the correct tool is always used. The system enables the automatic validation and monitoring of punching tools over ranges of more than one meter. The UHF evaluation unit also supports IO-Link-capable connections to integrate peripheral sensors and actuators to efficiently control the entire process.
Features
- Evaluation units work with common network protocols to enable simple integration into existing systems.
- IO-Link interface for connecting and monitoring peripheral devices for extended process control.
- Ranges of more than one meter enable flexible installation and reliable identification even over longer distances.
Recommended products for reliable identification of tools
Multifrequency processor units
UHF read/write heads with integrated processor unit (860...930 MHz)
UHF data carriers for tool ID
IO-Link sensor/actuator hubs
Multifrequency processor units
- Product group
- Multi-Frequency Processor
- Interface
-
Profinet I/O (IRT)
2 port Switch - Supported RFID technologies
-
LF 125 kHz (BIS VL)
HF 13.56 MHz (BIS VM)
UHF 860...930 MHz (BIS VU) - Number of connectable R/W heads / antennas
- 4
- Operating voltage Ub
- 24 V DC SELV/PELV
- Housing material
- Zinc, Die casting
- Ambient temperature
- 0...60 °C
- IP rating
- IP65, with connector
- Approval/Conformity
-
CE
UKCA
cULus
WEEE - Connection
-
2x M12x1-Female, 4-pin, D-coded
7/8"-Male, 5-pin
UHF read/write heads with integrated processor unit (860...930 MHz)
- Product group
- UHF (860...930 MHz)
- Working frequency
- 865…868 MHz
- Radio license
- Europe
- Dimension
- 130 x 50.5 x 130 mm
- Antenna type
- Patch
- Polarization
- circular
- Output power adjustable
- 5 dBm…24 dBm (3.2 mW…250 mW)
- Connection
- M12x1-Male, 4-pin, A-coded
- Housing material
-
PC, coated
ABS, Zinc, Die casting, (Connector) - Interface
- RS485
- Operating voltage Ub
- 24 V DC LPS Class 2
- Ambient temperature
- -20...55 °C
- IP rating
- IP54
- Approval/Conformity
-
CE
UKCA
cULus
WEEE
UHF data carriers for tool ID
- Product group
- UHF (860...930 MHz)
- Working frequency
- 850…960 MHz
- Dimension
- 23 x 1 x 100 mm
- Memory type
- EEPROM
- User data, read/write
- 128 Bit
- EPC memory, read/write
- 496 Bit
- TID memory, read-only
- 96 Bit
- Antenna type
- Dipole
- Installation
- metal-free (clear zone)
- Storage temperature
- -40...85 °C
- Ambient temperature
- -25...70 °C
- Housing material
- PET
- IP rating
- IP68
- Approval/Conformity
-
CE
UKCA
WEEE
IO-Link sensor/actuator hubs
- Interface
- IO-Link 1.1
- Operating voltage Ub
- 18...30.2 VDC
- Connection (COM 1)
- M12x1-Male, 4-pin, A-coded
- Connection slots
- 8x M12x1-Female, 5-pin, A-coded
- Analog inputs
- 8x Analog, voltage/analog, current/analog, temperature (0…10 V/-10…10 V/0…5 V/-5…5 V/5...10 V/4…20 mA/0…20 mA/Pt100/Pt1000/Thermocouple Type J/Thermocouple Type K)
- Configurable inputs/outputs
- no
- Current sum US, sensor
- 4 A
- Current sum UA, actuator
- 4 A
- Housing material
- Die-cast zinc, nickel-plated
- Dimension
- 68 x 31.8 x 181.5 mm
- Ambient temperature
- -5...70 °C
- IP rating
- IP67, when threaded in
- Transfer rate
- COM2 (38.4 kBaud)
- Process data cycle min.
- 55 ms
- Process data IN
- 22 bytes
- Process data OUT
- 1 byte
Further application examples in the field of cutting and punching
Discover more topics
Downloads
-
Industry brochure battery industry
