Monitor material availability with optoelectronic distance sensors
Distance sensors for precise detection of the amount of material on rolls in the coating process
The BOD optoelectronic distance sensors from Balluff are used to ensure that there is always enough carrier film available in the coating process. These sensors measure the distance to the film roll and precisely detect how much material is still available. The visible laser beam of the sensors enables quick and easy alignment, while the integrated IO-Link interface simplifies parameterization and integration into existing systems. As soon as the amount of material falls below a defined value, the operating personnel are informed so that the coils can be replaced in good time and production interruptions can be avoided.
Features
- Precise distance monitoring for reliable detection of the amount of material on the coils
- Visible laser beam for quick and easy adjustment of the sensor
- Extensive additional functions and parameterization options via IO-Link for easy adaptation to specific requirements
- Easy-to-read display for visualizing the setting functions and status display
Recommended products for material monitoring in coating processes
Distance sensors with plastic housing and red light laser for washdown
Mounting bracket for optoelectronic sensors
Distance sensors with plastic housing and red light laser
Distance sensors with plastic housing and red light laser for washdown
- Special characteristics
- Washdown
- Series
- 23K
- Dimension
- 51 x 23 x 52.4 mm
- Interface
- IO-Link 1.1 PNP/NPN/Auto-Detect NO/NC
- Principle of operation
- Photoelectric distance sensor
- Principle of optical operation
- Light time-of-flight
- Beam characteristic
- Collimated
- Light type
- Laser red light
- Light spot size
- 5.5 x 7 mm at 5 m
- Range
- 100...5000 mm
- Accuracy
- ±0.6 % FS
- Repeat accuracy
- 0.024 %FS
- Resolution
- ≤ 5 mm
- Connection
- Connector, M12x1-Male, 4-pin
- Housing material
- ABS
- Operating voltage Ub
- 18...30 VDC
- Approval/Conformity
-
CE
cULus
Ecolab
WEEE
Mounting bracket for optoelectronic sensors
- Version
-
Mounting brackets
2 adjustable axes - Use
- for photoelectric sensors BOS 23K
- Material
- Stainless steel
- Dimension
- 25 x 40 x 64.5 mm
- Mounting part
- Threads
Distance sensors with plastic housing and red light laser
- Series
- 26K
- Dimension
- 17 x 50 x 50 mm
- Interface
- Analog, current 4…20 mA linear rising/falling 2x PNP NO/NC
- Principle of operation
- Photoelectric distance sensor
- Principle of optical operation
- Triangulation
- Beam characteristic
- Divergent
- Light type
- Laser red light
- Light spot size
- 2 x 4.5 mm at 300 mm
- Range
- 80...300 mm, adjustable
- Accuracy
- ±0.25 % FS
- Repeat accuracy
- 0.25 %FS
- Resolution
- 0.1 %FS
- Connection
- Connector, M12x1-Male, 8-pin
- Housing material
- ABS
- Operating voltage Ub
- 18...30 VDC
- Approval/Conformity
-
CE
cULus
WEEE
Further application examples in the field of coating and drying
Discover more topics
Downloads
-
Industry brochure battery industry
