Similar Illustration
Only CAD model download is supported
Only CAD model download is supported
Fork Sensors with IO-Link
Principle of operation
Fork sensor
Housing material
Zinc, Die casting, black coated
PUR, PA 6.6
PUR, PA 6.6
Interface
IO-Link-Device: 1.1.3
Push-Pull/IO-Link: NO(PNP)/NC(NPN)
Push-Pull/IO-Link: NO(PNP)/NC(NPN)
IP rating
IP67
Do you have any questions about the product?
Get in touch with us.
This product page contains information for Germany – Balluff GmbH, Neuhausen a.d.F. Some of the product descriptions on this website are generated automatically from structured product data.
Fork sensors and angle sensors – BGL0081
The BGL 120A-101-S49 fork sensor, order code BGL0081, has dimensions of 10 x 140 x 93 mm and a fork opening of 120 mm. It operates as a through-beam sensor with a divergent beam characteristic and uses a red LED. The light spot size at the light exit is Ø 2.0 mm. The sensor supports IO-Link V1.1.3 and provides a Push-Pull switching output configurable as NO (PNP) or NC (NPN). Its operating voltage is 10...30 VDC. Connection is via a 3-pin M8x1 male connector. The housing consists of black-coated die-cast zinc, PUR and PA 6.6; the sensing surface is coated glass. Approvals and conformity markings are CE, UKCA, cULus and WEEE.
Only CAD model download is supported