Similar Illustration
Only CAD model download is supported
Only CAD model download is supported
Pressure-rated inductive sensors
Dimension
Ø 18 x 73 mm
Style Housing
M18x1
Installation
for flush mounting
Range
1.5 mm
Switching output
PNP normally open (NO)
Do you have any questions about the product?
Get in touch with us.
This product page contains information for Germany – Balluff GmbH, Neuhausen a.d.F. Some of the product descriptions on this website are generated automatically from structured product data.
Pressure-rated inductive sensors – BHS001N
The BES 516-300-S144-S4-D sensor, order code BHS001N, has an M18x1 housing with dimensions of Ø 18 x 73 mm and is intended for flush mounting. It provides a 1.5 mm range and a PNP normally open (NO) switching output with a switching frequency of 1000 Hz.
The stainless steel housing has an EP sensing surface. The sensor uses a 4-pin M12x1 male connector and operates with an operating voltage of 10...30 VDC. Its ambient temperature range is -25...80 °C, and the maximum pressure rating is 350 bar. The sensor has IP68 protection and carries CE, UKCA and cULus approvals, with WEEE conformity.
Only CAD model download is supported