Similar Illustration
Only CAD model download is supported
Only CAD model download is supported
Pressure-rated inductive sensors
Dimension
Ø 12 x 78 mm
Style Housing
M12x1
Installation
for flush mounting
Range
1.5 mm
Switching output
PNP normally open (NO)
Do you have any questions about the product?
Get in touch with us.
This product page contains information for Germany – Balluff GmbH, Neuhausen a.d.F. Some of the product descriptions on this website are generated automatically from structured product data.
Pressure-rated inductive sensors – BHS006C
The BES M12EL-PSC15B-S04G-HM01 pressure-rated inductive sensor, order code BHS006C, has a Ø 12 x 78 mm housing in the M12x1 style for flush mounting. Its sensing range is 1.5 mm, with a PNP normally open (NO) switching output and a switching frequency of 300 Hz. The housing material is 1.4104 stainless steel, and the sensing surface is made of EP.
The sensor has an M12x1-Male, 4-pin connector and operates at 10...30 VDC. The ambient temperature range is -25...70 °C. Its maximum pressure rating is 500 bar, and the IP rating is IP68. Approvals and conformity include CE, UKCA, cULus and WEEE.
Only CAD model download is supported