Capacitive level sensors with media contact
Need to detect and monitor fill levels in containers, pipes, or tanks while in contact with the media? This is not a problem for our capacitive level sensors with media contact. These detect the fill level of granulated materials, powders, viscous, or liquid media, as well as bulk materials. They are suitable for a wide variety of applications, as they are available in a wide range of versions, including:cylindrical configurations, immersion probes, hole or flange mounting, and in pressure-rated versions are available with a wide variety of plug and cable variants. In addition, their diverse range of housing materials, such as stainless steel, PTFE, and PEEK, ensure the best possible chemical resistance.
The capacitive sensors from Balluff come equipped with our patented Smart Level technology, allowing them to compensate for moisture, foam, and adhesion of any kind. This ensures high application reliability.
- For fill level detection of plastic granules, grains, feed and wood pellets, oils, aqueous liquids, acids, lyes, conductive powders, etc.
- Large selection of configurations and housing materials as well as cost-effective versions
- Easy adjustment and setup, also via IO-Link
- Patented Smart Level technology to compensate for adhesion, foam, and moisture
|Order code||Price||Dimension||Thread (A)||Connection||Interface||Housing material||Actions|
|330.01 USD||Ø 18 x 73 mm||M18x1||Cable, 2.00 m, PTFE||PNP Normally closed (NC)||PTFE|
|330.01 USD||Ø 18 x 73 mm||M18x1||Cable, 2.00 m, PTFE||PNP Normally open (NO)||PTFE|
|108.29 USD||Ø 18 x 88.5 mm||M18x1||Connector, M12x1-Male, 4-pin||PNP Normally closed (NC)||PBT|
|151.31 USD||Ø 30 x 87 mm||M30x1.5||Connector, M12x1-Male, 4-pin||PNP NO/NC||PBT|
|108.29 USD||Ø 18 x 88.5 mm||M18x1||Connector, M12x1-Male, 4-pin||PNP Normally open (NO)||PBT|
|309.49 USD||Ø 8 x 54 mm||M8x1||Connector, M8x1-Male, 3-pin||PNP Normally open (NO)||1.4301 stainless steel|